The DF64 is a well-known single dose coffee grinder in the home grinder market thanks to its sensible performance-to-price ratio. It uses 64mm flat burrs, which are usually found on high-end grinders.
After several upgrades from Gen 1 to Gen 2.3 and Gen 2.4, the line has moved on to Gen 3, launched in 2026 under the name DF64P.

CORE FEATURES OF THE DF64 GRINDER LINE
- Stepless grind adjustment: The dial on top of the grinder allows very fine adjustments, so you can easily find the right setting for espresso.
- Anti-popcorn lid: Keeps the beans in place while grinding.
- 58mm metal dosing cup: Flip the ground coffee straight into the portafilter neatly after grinding.
- Tool-free disassembly: Open the grinder for cleaning quickly and simply, with no screws involved.
WHAT IS NEW IN THE DF64P GEN 3
- Fully anodized aluminium body: The anodized finish resists fingerprints. The CNC-machined aluminium surface has vertical grooves rather than being completely smooth.
- Magnetic quick-release chute: Pull the chute out by hand to clean the grinder throat more easily. Earlier generations needed screws removed before cleaning.
- Magnetic grind indicator ring: The grind indicator ring attaches with magnets, so it comes off easily for cleaning.
- Brass grind adjustment thread: The adjustment collar uses a brass thread, which resists corrosion well and turns more easily than the steel threads on previous versions.
- Quiet motor: The DF64P Gen 3 runs much more quietly than the Gen 2.4.
- Auto-stop after grinding: The motor switches off by itself once the grinding chamber is empty. Load the beans, start the grinder and get on with something else without waiting to switch it off by hand.
- Plasma anti-static: Grounds drop neatly into the cup with little scatter and few clumps.

TiCN COATING TECHNOLOGY
TiCN (Titanium Carbonitride) coating applies a hard thin film to a surface by adding carbon to a traditional Titanium Nitride (TiN) coating. The added carbon makes TiCN harder and lower in friction than TiN.
The 64mm burrs of the DF64P Gen 3 use TiCN coating. The coating is only 2-3 microns thick and bonds almost seamlessly with the burr surface. The 64mm TiCN-coated burrs offer:
- Wear resistance: Especially helpful when the grinder regularly grinds at espresso fineness.
- Lower friction: A friction coefficient of just 0.08-0.1 keeps heat down during grinding and preserves the coffee flavour.
- Non-stick: The smooth surface holds less coffee on the burrs and improves grinding speed.
- Extra hardness: Stands up to foreign objects that accidentally get into the grinder with the beans.

DF64P GEN 3 VS DF64 GEN 2.4
The DF64P Gen 3 and DF64 Gen 2.4 share the same 64mm burrs and Plasma technology, while the body design, motor and cleaning method differ.
| DF64P Gen 3 | DF64 Gen 2.4 | |
| Burrs | 64mm TiCN-coated flat burrs | 64mm Red Titanium flat burrs |
| Motor | 200W | 250W |
| Speed | 1400RPM | 1400RPM |
| Anti-static | Plasma, outside the grinder throat for better effect | Plasma, inside the grinder throat |
| Auto-stop after grinding | Yes | No |
| Running noise | Quiet | Slight vibration |
| Body | Anodized CNC-machined aluminium | Powder-coated aluminium alloy |
| Chute | Magnetic quick release | Screw removal |
| Grind indicator ring | Magnetic, quick to remove for cleaning | Fixed to the grind adjustment assembly |
| Grind adjustment thread | Brass | Steel, a little stiff to turn due to the fine thread |
| Retention | ~0.1g | ~0.1g |
| Single dose hopper | 60g | 60g |
| Weight | 6.2kg | 6.7kg |
| Dimensions | W 120 x D 212 x H 315 mm | W 255 x D 130 x H 300 mm |
| Voltage | 220V 50Hz | 220V 50Hz |
| Colours | Black, Silver | Black, White |
| Price | 7,900,000 VND | 6,500,000 VND |
WHERE DOES THE DF64P IMPROVE ON THE GEN 2.4?
Most of the DF64P upgrades are about cleaning and build finish. The chute pulls out by hand for cleaning the grinder throat. The magnetic grind indicator ring makes the grinder easier to take apart for cleaning than the Gen 2.4. The brass adjustment thread turns more smoothly and lasts longer than steel. The anodized body of the DF64P also keeps its colour and stays free of fingerprints better than powder coating.
When grinding, the DF64P runs much more quietly than the Gen 2.4 and stops by itself when finished. The Gen 2.4 has no auto-stop, so the user has to stay and switch it off.
Both grinders produce nearly the same grind quality because they share the same 64mm burr size. The choice comes down to cleaning habits and budget more than to the coffee in the cup.
DF64P GEN 3 SPECIFICATIONS
- Colours: Black / Silver
- Burrs: 64mm TiCN-coated flat burrs
- Motor: 200W brushed DC, 1400RPM
- Grind adjustment: Stepless, dial 0-10
- Auto-stop after grinding: Yes
- Single dose hopper: 60g
- Anti-static: Plasma
- Retention: ~0.1g
- Body: Anodized CNC-machined aluminium
- Weight: 6.2kg
- Dimensions: W 120 x D 212 x H 315 mm
- Voltage: 220V 50Hz
- Warranty: 12 months
SUGGESTED GRIND SETTINGS FOR THE DF64P GEN 3
The DF64P uses a stepless dial from 0 to 10. The lower the number, the finer the grind.
| Brewing method | Grind setting |
| Turkish coffee | 0-1 |
| Espresso | 1-3 |
| Moka pot | 3-6 |
| Pour over, Syphon, French Press, Aeropress | 6-10 |
***Note:
- Always keep grind setting 0 pointing to the 6 o’clock position.
WHAT IS IN THE DF64P BOX
- 1 x DF64P Gen 3 grinder
- 1 x Silicone blower
- 1 x Metal lid
- 1 x Metal dosing cup (58mm)
- 1 x Cleaning kit: cleaning brush, screwdriver, spare spring
iCup is proud to bring customers the world’s finest coffee brewing tools.
Tiếng Việt












Reviews
There are no reviews yet.