There are plenty of “single dose” espresso grinders on the market, all aiming to grind small amounts of fresh coffee with as little retention as possible.
Grinder makers have tried several solutions, including:
- Bellows hopper: Fitted in place of the standard hopper. After grinding, you press it a few times to blow a strong burst of air inside and push out retained grounds. These hoppers can be made as separate accessories for grinders that were never optimised for single dosing. They work quite well, cutting retention to ~ 0.5g
- Tilting the grinder: So the grounds head towards the outlet more effectively than in a horizontal position
- Spring knocker: Creates vibration that knocks out retained coffee. You need to flick it a few times after grinding. When it works well, it can cut retention to ~0.2g
So how does the Niche get retention down to zero?
THE NICHE ZERO COMBINES 2 SOLUTIONS TO THE RETENTION PROBLEM
SOLUTION 1: THE NICHE ZERO HAS A SPECIALLY DESIGNED 3-PRONG SWEEPER
Normally, ground coffee flows straight out of the outlet. Without enough force behind it, some spots inside the grinder become permanent homes for retained grounds. Only when you grind fresh coffee does this old coffee get pushed out, affecting the taste of your cup.
A sweeper built into the burr set is not a new idea, but to get retention down to zero, Niche had to take this part to a whole new level.
The sweeper sits at the very bottom with three arms and fits the grinder core snugly. Its rounded corners and bevelled edges were calculated and tested many times so it sweeps out 100% of the grounds in one go.
Of course, the sweeper has to work together with solution 2

SOLUTION 2: THE NICHE ZERO IS TILTED AT 15 DEGREES
The tilt helps push the grounds out in two ways.
- First: Ground coffee naturally falls downwards. Tilting the grinder slightly sends the grounds quickly to the lowest point, where the outlet is.
- Second: Together with the sweeper, all the grounds exit the outlet faster. Grinding 20g with the Niche takes only about 15 seconds (the same amount takes the Mahlkonig X54 a full 30 seconds, and it still retains grounds)

WHY THE NICHE ZERO IS A GREAT GRINDER FOR HOME BREWERS
A home coffee grinder needs to tick these boxes:
- Easy to use, easy to clean, and easy to replace parts when needed
- Good looks
- Compact enough to fit into even the tightest spots
- Versatile: It should grind properly for espresso, yet still handle other brew methods when needed, such as French press, Pour Over, AeroPress…
The Niche Zero ticks all four: it is especially easy to use and clean because Niche designed it specifically for home brewers.
THE NICHE ZERO USES ITALIAN-MADE 63MM MAZZER CONICAL BURRS
The burrs are the most important part of any coffee grinder. Niche tested many different burrs and chose the 63mm Mazzer conical burrs, code 0191C, which are widely used in Mazzer’s high-end commercial grinders from Italy.
Conical burrs are also simpler to fit, so you can remove them for cleaning and put them back quickly without needing a screwdriver to realign them, as flat burrs do. That makes the Niche ideal for home brewers with no technical knowledge of grinders.
MAZZER 0191C CONICAL BURR SET
Made in Italy, good for up to 750kg of coffee before needing replacement
SHARP MAZZER BURR EDGES
Essential for a delicious, consistent espresso every day
DEDICATED 8-BLADE BURRS
Grinds for many brew methods but is best suited to espresso.
PERFECT PRECISION
Designed to fit into the Niche Zero easily by hand, with no screws
DOES THE NICHE ZERO REALLY HAVE ZERO RETENTION?
This is the first question everyone interested in this grinder asks. So here are the real-world figures iCup measured right after unboxing the Niche Zero (these numbers only apply to the beans we used and may vary with your grind size and coffee)
Grind setting: 20
Dose per grind: 15g
- First grind: The Niche Zero swallowed 1g of coffee and gave back only 14g
- Second grind: The Niche Zero swallowed another 0.3g and gave back only 14.7g (at this point 1.3g was retained inside)
- Third grind: The Niche Zero gave out 14.8g
- Fourth grind: The Niche Zero gave out 15.1g
- Fifth grind: The Niche Zero gave out 14.9g
- Sixth grind: The Niche Zero gave out 15g
- Seventh grind: The Niche Zero gave out 15.2g
- Grinds 8-9-10: The Niche Zero gave out 15-14.9-15.1g. From then on, retention inside the Niche always stayed at 0.1g to 0.2g
So there are still a few tiny spots inside this grinder where grounds can slip in and get stuck. Once they fill up, the output is fairly stable, but retention is not zero. Swapping around ~0.2g is very good and has almost no noticeable effect on flavour.
- Rough estimate: Total retention inside the Niche is about 1g, and about 0.2g of retained coffee is swapped with each grind
All things considered, these figures show the Niche Zero is in practice still one of the best-performing home coffee grinders.
THE NICHE ZERO IS INCREDIBLY SIMPLE TO USE
There is just one on/off switch. Grind adjustment on the Niche is done in a single turn.
The hopper doubles as the adjustment ring. To go from fine to coarse, just turn the hopper anticlockwise and pick the right number. Suggested settings:
- Espresso from 15-25
- Filter drip: 30-40
- French Press: Above 50 (sometimes your grind will go past the numbers on the grinder, in which case… you will need to mark it yourself)

THE NICHE ZERO WITH VARIOUS HOME ESPRESSO MACHINES



THE NICHE ZERO ALSO GRINDS EASILY FOR MANUAL BREW METHODS



NICHE ZERO COFFEE GRINDER SPECIFICATIONS
- 63mm Mazzer 0191C steel conical burrs made in Italy
- Grind speed: 1.5g/s for espresso; 2g/s for pour over
- Noise level while grinding: Below 72dB
- Powder-coated aluminium alloy body with oak trim
- Bean capacity: Up to 50g
- Motor speed: 350RPM
- Stepless grind adjustment down to the micron
- Built-in NFC disc that spreads the beans before grinding
- Safety mode: only grinds with the lid closed
- Grinder weight: 4.1 kg
- Dimensions: W122 x H311 x L211 mm
- Voltage: 220V/50-60Hz
- Designed and quality controlled in the UK – Made in China
THE NICHE ZERO BOX INCLUDES
- 1 máy xay Niche Zero
- 1 dosing cup (58mm)
- 1 cleaning brush
- 1 user manual
VIDEO: RESETTING THE NICHE ZERO’S STANDARD GRIND CALIBRATION AFTER CLEANING
MORE COFFEE GRINDERS TO CONSIDER
iCup is proud to bring customers the world’s finest coffee brewing tools.
Tiếng Việt






Reviews
There are no reviews yet.