What an entry-level home espresso machine needs most is to be ready to go as soon as you want it.
So the Gemilai 3006 uses a 1700W Thermoblock to heat water. Switch it on and it is ready to use right away!
Still, every machine with this heating technology behaves the same way. So why would you choose the CRM3006 over the CRM3005L, the CRM3007L or similar machines on the market?
WHAT SETS THE GEMILAI CRM3006 ESPRESSO MACHINE APART

- PTC (Positive Temperature Coefficient) heater inside the grouphead: An instant-heating semiconductor element is fitted in the grouphead. Water right at the group is topped up with heat so it stays as stable as the water from the Thermoblock. Machines like the E61 heat up by circulating hot water through the grouphead and need 20-30 minutes, while the Gemilai 3006 grouphead is hot after just 60 seconds.
- A strongly mechanical design: A fresh style that is the complete opposite of the standard C-shape. The CRM3006 has manual switches and levers that give you a feeling of control. In a world this out of control, turning or flipping something real can genuinely lift your mood. A cup of coffee afterwards multiplies the effect.
- The most powerful steam wand among Thermoblock machines: Power is raised to 1700W, and paired with a 2-hole steam tip it can surprise even experienced users. It takes only about 35 seconds to make silky microfoam for a Latte. Home milk-coffee lovers will clearly enjoy the Gemilai G3006.
- Cool-touch steam wand for safe use: This detail usually appears only on high-end machines. The G3006 earns extra points for including it.
- Nicknamed OWL by Gemilai: From the front, the G3006 really does look like an owl

BASIC FEATURES OF THE GEMILAI G3006 ESPRESSO MACHINE

- PID temperature control: Set anywhere from 80 to 102°C depending on the coffee and your taste.
- Switch on and brew with little waiting: The Thermoblock heats water instantly.
- Built-in pre-infusion: The soak time can be set up to 30 seconds (Pre infusion). It only suits the 8-9g single basket because of the limited soak volume
- Standard 58mm basket: Easy to find accessories such as an OCD, a tamper or a WDT tool…
- Large 1.7L water tank: At one cup a day, you only refill it about every two weeks
- Built-in pressure gauge: Shows the real pressure so you can adjust grind size and tamping.
- LED display: Bright and clear, timing both espresso extraction and milk steaming automatically
- Italian ULKA vibration pump: Durable and effective, though a little noisy
- 3-way solenoid valve: Automatically stops the water and releases pressure as soon as extraction ends. You can remove the portafilter from the group right away, and the puck comes out dry and easier to clean.
- Automatic brewing mode: Two automatic modes for the single and double basket. Press and hold to set the brew time for each button!
- Manual brewing mode: Start and stop as you like. No pre-infusion in this mode
- Two colours to choose from: The ivory white version looks soft, while the polished stainless steel version is extremely easy to wipe clean.
LARGE 1.7L WATER TANK
Comfortably lasts a whole week before refilling
CUP WARMING AREA
Fits 1 Cappuccino cup and 2 espresso cups
EASY-CLEAN DRIP TRAY
No awkward corners, comes apart for easy cleaning
NON-SLIP FEET
Shock-absorbing rubber pads keep it steady during extraction

DRAWBACKS OF THE GEMILAI CRM3006 ESPRESSO MACHINE
- Water pools on the cup warmer: If you place wet cups directly on top of the machine, water runs onto the surface and leaves marks when it dries. Wipe this area regularly.
- The steel on the Gemilai 3006 is a little thin and sounds hollow when you tap it: For a machine in this price range, though, a shiny steel body is actually a plus.
- No OPV: The maximum pump pressure cannot be limited, so coffee ground too fine can lead to 12-15 bars and hurt the flavour.
- Pre Infusion mode is not very effective: You can set the soak time (P00-P30), but not how long the pump runs. The machine releases about 7-8ml of water in 1 second, then pauses for 0-30 seconds as set. That is far too little water to wet all the coffee in the basket, so it backfires and makes the extraction uneven. Only use pre-infusion for a single 8-9g shot. If Gemilai updates the firmware to let you set the pump run time as well, it will be far better!

TIPS FOR USING THE GEMILAI G3006 ESPRESSO MACHINE
- Clean it once a month with a dedicated espresso machine cleaning powder to keep it running smoothly.
- Lock the portafilter in 5 minutes before brewing, or run some water through to preheat it before adding coffee and extracting.
- Switching from espresso to steaming takes a moment: The machine uses a single Thermoblock, so you need to wait about 30 seconds for it to reach steaming temperature.
- When switching from steaming back to brewing, flush water for about 10-20 seconds until no more steam pressure escapes from the group. Skip this step and the coffee will extract too hot and taste burnt.
- When the red float under the drip tray rises, it is time to empty the tray. The tray is quite small, only about 500ml
SETTING UP THE GEMILAI CRM3006 ESPRESSO MACHINE
- Automatic brewing mode: Press and hold the first button (single shot) or the second button (double shot) from the left for the whole extraction until the coffee is done. Release it and the setting is saved. Next time, press once and the machine brews and stops at exactly the chosen time.
- Water temperature: Press and hold the “+” button until the PID setting appears. Then press + or – to set the water temperature from 80 to 102°C as needed.
- Pre Infusion mode: Press and hold the “-” button until P00 – P30 appears. Then press + or – to choose P00 to P30, matching a soak time of 0 to 30 seconds. The soak volume is fixed at about 7ml, so it will not wet the whole puck. Set it to P00 to skip this function.
- Factory reset: Press and hold the single and double shot buttons together for 3 seconds until the display and lights blink. The default times are 25 seconds for a single and 40 seconds for a double, including the pre-infusion time (2 seconds). The default water temperature is 93°C
GEMILAI G3006 ESPRESSO MACHINE SPECIFICATIONS
- Brand: Gemilai
- Model: CRM3006 or G3006
- Dimensions (W x D x H): 247 x 370 x 357 mm
- Machine weight: 7.8kg
- Material: Stainless steel/ ivory white paint
- Voltage/ Power: 220V/ 1700W
- Italian Ulka vibration pump
- Maximum pump pressure: 15 bars
- Built-in real-time brewing pressure gauge
- Built-in digital display for setting brew profiles (temperature, time), with automatic shot timing
- Water tank: 1700ml (1.7 litres)
- Thermoblock for both extraction and milk steaming
- Portafilter with a standard 58mm basket
- Made in China
- 12-month warranty
THE GEMILAI CRM3006 SET INCLUDES

- 1 máy pha
- 1 x 58mm portafilter
- 1 x 9g basket + 1 x 18g basket
- 1 x metal tamper with plastic handle
- 1 x plastic coffee scoop
- 1 x rubber blind basket for cleaning the machine
- 1 x cleaning brush
- 1 x detachable steam lever
- 1 tovit
- 1 x user manual and machine documents (Download the PDF here)
Tiếng Việt









Reviews
There are no reviews yet.