The Gemilai CRM3007L is a compact home espresso machine sold in many markets. Depending on the region, it goes by different names such as Turin Legato, Corrima or Apex.
For all its features, the CRM3007L naturally cannot match high-end machines in the 30-50 million VND range, but it really puts machines under 30 million VND on notice (namely the Lelit Victoria and the Profitec Go). This compact, affordable machine packs features that many owners of mid-range Italian machines have wished for over the years.
Since its launch around November 2023, the CRM3007 has been rated extremely highly by the international coffee community. It has been called the machine that knocks out the Gaggia Classic Pro and the Rancilio Silvia, which cost twice as much. The CRM3007 is also a real turning point that lifts the home espresso segment to a new level.
KEY FEATURES OF THE GEMILAI CRM3007L ESPRESSO MACHINE
- Standard 58mm basket: Easy to replace, and easy to find accessories such as an OCD or WDT tool…
- Built-in PID: Precise brewing temperature control from 80 to 102°C (go lower for dark roasts and higher for light roasts)
- Built-in pressure gauge: Shows the real pressure so you can adjust grind size and tamping (up to 15 bars). Grind fine and tamp firmly so the gauge reads about 9 bars for the smoothest coffee.
- LED display: Bright, clear, and lets you set parameters directly with the touch buttons
- 500ml espresso boiler plus an independent Thermoblock: The boiler handles espresso while the Thermoblock feeds the steam wand. You can froth milk right after pulling a shot without waiting a single second (a single-boiler machine needs 2-4 minutes). The Thermoblock is not as powerful as a boiler, but it is very stable and steams milk easily in about 40 seconds.
- Italian ULKA vibration pump: Used in many Italian home machines. Durable, and runs for long periods without maintenance
- Automatic brewing mode: Stops by itself when the timer reaches the set point. Ideal if you brew only one coffee at one grind size. Not recommended if you drink many different coffees.
- Automatic shot timer: Press the brew button and the display starts timing immediately. You only need a small digital scale, no timer function required.
- Adjustable flow rate: The machine has an adjustment valve near the grouphead. A setting of about 5-7ml/s works best for espresso on the CRM 3007L (turn clockwise to increase the flow and the other way to reduce it)
- ECO mode: After about 20 minutes without use, the machine switches to standby. The water is kept at 50°C, so it is ready in under 2 minutes after you switch it back on!
- Can be modded with an OPV (pressure limiting valve) or a dimmer to control pump power: This turns the Gemilai CRM3007L into a hugely customisable machine that can compete with truly high-end espresso machines.
DUAL HEATING SYSTEM
A 500ml boiler (espresso) and a Thermoblock (milk steaming)
ITALIAN ULKA VIBRATION PUMP
Proven durable across many generations of Italian machines and used in many home espresso machines
BOILER RIGHT ABOVE THE GROUPHEAD
Eliminates the temperature gap between the boiler and the portafilter. Stable even during back-to-back shots
DUAL DISPLAYS
One shows and sets the brewing parameters, the other shows the real pressure

DRAWBACKS OF THE GEMILAI CRM3007L ESPRESSO MACHINE
- The boiler and the Thermoblock serve espresso and steaming separately, but you cannot do both at once, only one after the other: If you prefer to save time, consider a true dual boiler machine or a heat exchanger machine such as the CRM3035A. Given the price, calling this a drawback of the Gemilai CRM3007L is a little unfair. Still, iCup lists it so customers get a clear picture of the product.
- The Pre Infusion mode is almost useless (automatic brewing mode): You can set the soak time from 0 to 30 seconds (P00-P30), but not the amount of water used. By default the CRM3007L releases about 7ml of water in 1 second, pauses (0-30 seconds), then keeps dispensing for the set time. 7ml is far too little to wet all the coffee in the basket, so it backfires completely and makes the extraction uneven. If you use this mode, iCup recommends setting it to P00 to skip pre-infusion (press and hold the minus button to set it). If you want, pre-infuse by hand by switching the brew button on and off!
- Steaming milk makes a continuous “pop… pop…” sound: The sound is quiet and not unpleasant. It is simply not as smooth as steaming with pressure from a regular boiler
- The machine has no water sensor, so it gives no warning when the tank runs dry: This can hurt the machine’s lifespan if you often forget to refill the water.
- Packing in so much new technology means some trade-off in build quality: In fairness, the overall finish of the Gemilai CRM3007 is quite good. Look closely at every edge, though, and it is not fully refined. Some edges still have unfinished burrs, and the fit between the water tank, the drip tray and so on is not truly tight.
- Flow control is adjusted by turning a screw: Since the screw head is already exposed, Gemilai could easily have added a knob to adjust the water flow through the coffee. It is hard to understand why the brand did not do something this simple.
- The power cord exits at the back, so it looks a little untidy when you view the machine from the front: This only happens when the Gemilai CRM3007 sits on a counter with an open front. If the machine sits against a wall, the cord does not affect its looks. A cord coming out from the base or the side would look better!
TIPS FOR USING THE GEMILAI CRM3007L ESPRESSO MACHINE
- From hands-on experience, brewing a medium roast at about 88°C helps the Gemilai CRM3007L make a well-balanced cup. Light roasts always need a finer grind and a temperature of about 92-95°C
- The machine is ideal for home use. Not recommended for anyone buying a machine to open a café (not even a small one)
- Clean it once a month with a dedicated espresso machine cleaning powder to keep it running smoothly.
SETTING UP THE GEMILAI CRM3007L ESPRESSO MACHINE
- Water temperature: Press and hold the “+” button until the PID setting appears. Then press + or – to set the water temperature from 80 to 102°C as needed.
- Pre Infusion mode: Press and hold the “-” button until P00 – P30 appears. Then press + or – to choose P00 to P30, matching a soak time of 0 to 30 seconds. The soak volume is fixed at about 7ml, so it will not wet the whole puck. Set it to P00 to skip this function.
- Flow rate: Use a short flat-head screwdriver to tighten or loosen the screw right next to the machine’s LED. Turn clockwise to reduce the flow and the other way to increase it. A setting of about 5-7ml/s is recommended
- Automatic brewing mode: Hold the last button for the whole extraction until the coffee is done. Release it and the setting is saved. Next time, press once and the machine brews and stops at exactly the chosen time.
GEMILAI CRM3007L ESPRESSO MACHINE SPECIFICATIONS
- Brand: Gemilai
- Mã máy: CRM 3007L
- Dimensions (W x D x H): 220 x 310 x 370 mm
- Machine weight: 11kg
- Material: Stainless steel
- Voltage/ Power: 220V/ 1850W
- Italian Ulka vibration pump
- Maximum pump pressure: 15 bars
- Built-in real-time brewing pressure gauge
- Built-in timer that starts as soon as you press brew
- Built-in digital display for setting brew profiles (temperature, time)
- Water tank: 1700ml (1.7 litres)
- 1 steel 500ml boiler for espresso and 1 Thermoblock for steaming milk for Cappuccino
- Portafilter with a standard 58mm basket
- Made in China
- 12-month warranty
THE GEMILAI CRM 3007L SET INCLUDES
- 1 Máy pha
- 1 x 58mm portafilter
- 1 x 8g basket + 1 x 18g basket
- 1 x metal tamper with plastic handle
- 1 x plastic coffee scoop
- 1 x rubber blind basket for cleaning the machine
- 1 x user manual
Tiếng Việt






















Reviews
There are no reviews yet.