It has been on the market since early 2021, and as of 2024 the Lelit MaraX is the only heat exchanger espresso machine in the world with dual electronic probes that monitor and control both the brewing water temperature and the milk steaming steam.
The dual probes check and adjust the temperature twice per second based on the user’s settings. This runs continuously the whole time the machine is on, for the highest temperature stability.
1. THE LELIT MARA X IS AN UPGRADED HEAT EXCHANGER ESPRESSO MACHINE WITH DUAL PROBES

What heat exchanger (HX) machines have in common is that they only manage steam temperature, which indirectly affects the brewing water temperature. So users usually have to flush some water to cool it down before brewing.
For people who mostly drink espresso, this is genuinely annoying!
The Mara X is also a heat exchanger machine, but it solves this problem with 2 separate priority modes set by a switch on the side:
- Coffee Mode (position 0): An extra temperature sensor manages the water temperature for espresso. The brewing temperature is set with a switch under the drip tray (3 settings: 91-93-95). This is the favourite mode of espresso and americano drinkers.
- Steam Mode (position 1): The machine manages steam at high temperature and pressure, ideal for Latte or Cappuccino lovers. You need to flush some water before pulling espresso, because an overly high temperature hurts the coffee flavour.
Among espresso machines on the market, the Mara X is the only heat exchanger machine that can do this. Combining 2 priority modes and 3 temperature ranges gives you 6 temperature and pressure profiles.

2. THE LELIT MARA PL62X IS A SEMI-AUTOMATIC MACHINE WITH A CLASSIC E61 GROUPHEAD
Semi-automatic means you control extraction with a manual lever. The machine does not stop automatically by time or volume.
So what is so great about the E61 group that so many machines use it?
- Its solid brass group weighs up to 4kg, so once it is hot, the temperature is extremely stable.
- Its water delivery mechanism is simple and effective for great coffee.
- It is beautiful! A purely mechanical kind of beauty. And it really is purely mechanical, so maintenance is very easy. Grease it and change the gaskets now and then, and it keeps running smoothly for a decade.
- The design has not changed since 1961 and is found on millions of machines, proving its quality for more than 60 years straight.
3. THE LELIT MARA X HAS A NO-BURN STEAM WAND
A no-burn steam wand keeps you from getting burned if you touch it, on purpose or by accident. It still gets a little warm after frothing milk (but is still easy to grab and reposition).
The steam wand is also completely smooth, with no rubber grip, so it is very easy to clean.
4. THE LELIT MARAX USES AN EXTREMELY QUIET OLAB SILENT GREEN VIBRATION PUMP
One surprise for users is how quietly the Mara X runs. Measurements show about 45 decibels in use, roughly 30% less than a normal vibration pump. It feels close to the quietness of a rotary pump machine!
Most notably, the pump is not screwed to the machine in the usual way. It hangs on a system of shock-absorbing rubber mounts. These mounts limit the vibration passed from the pump into the body, which in turn lowers the noise during use.

5. THE LELIT MARAX HAS A BUILT-IN PRE-INFUSION OF ABOUT 10 SECONDS
The first time you use the Mara X, you may be startled that after pulling the lever for a full 10 seconds no coffee comes out yet (while the pump is running). What is going on, is the machine broken or did you do something wrong?
No need to worry! This is just the Mara X’s built-in pre-infusion. Pre-infusion lets the coffee bloom evenly and limits channeling, which causes under-extraction.
This pre-infusion slowly pumps water at low pressure so it soaks the whole coffee puck evenly for about 10 seconds. The pressure then rises to a maximum of about 10 bar for full extraction.
Whether you use dark or medium roasted beans, the Mara X’s pre-infusion does an excellent job.
For light roasts, this pre-infusion time can be too short, since the beans need more time to soak before extraction. You may want to look at the Lelit Bianca with its flow control paddle.
OTHER FEATURES OF THE LELIT MARA X ESPRESSO MACHINE
- Ready and low water indicator lights: No need to guess whether the machine is hot enough yet
- Backlit mechanical power switch: Can be left on so the machine works with a timer plug
- Dual gauges: Show boiler pressure and pump pressure at the same time
- Lelit’s own 58mm double-spout portafilter: Directs the espresso flow forward so you can watch it easily
- Upgradeable with a Flow rate control kit: Helps you build brewing profiles for different coffees
- Colour options: Black/ White/ Steel
DRAWBACKS OF THE LELIT MARA X ESPRESSO MACHINE
The Mara X is a good home machine, but of course it is not perfect. A few drawbacks are a real shame, since Lelit could easily have fixed them before launch
- The feet are too low and come off easily when dragged across the counter: To move the Mara X you have to lift it completely (and your fingers cannot get underneath, while the machine is quite heavy). If you drag it, the rubber feet come off and have to be reattached. The low feet also make it harder to clean under the machine and make it look a little unbalanced. You can set the machine on a piece of stiff board to move it easily, or buy a set of taller replacement feet.
- The C13 power plug sticks out at the back, so the machine cannot sit flush against the wall (5cm gap): The fix is a C13/C14 angled adapter cable (left or right angle depending on where the machine sits), which cuts the gap to about 2cm. This detail also spoils the rear view when the machine sits on an open bar. Taller feet with the cable routed underneath would have been far better.
- The machine looks a little unbalanced: Mostly because the feet are so low that it seems to be “sitting” on the counter. The fix is a set of 4 wooden feet designed for the Mara X. With more clearance underneath, the machine looks far better.
- Solid overall, but not seamless: You can clearly feel the uneven joins along the sides and the top edge.
- The portafilter is hard to clean: The included portafilter is beautiful and quite unusual. Its curved lip sends the espresso half way round before it drops into the cup. It looks great but makes cleaning harder. To simplify things, you can add a genuine Lelit bottomless portafilter. It is easier to clean and gives better control over espresso extraction.
- The drip tray cover has no steel trim, so a lot of messy detail underneath is exposed: If the brand had done this like on the Lelit Bianca, the Mara X would look much more finished.
- Removing and refitting the drip tray needs care: Two rubber nubs damp vibration and hold the tray in place. Taking it out and putting it back can knock them loose, so you have to be gentle every time. Honestly, focusing on the cup of coffee is enough already, worrying about tiny things like this is a waste of energy.
- The hot water tap gets in the way: The machine is quite narrow yet still has a hot water tap, so it sometimes obstructs the E61 lever. Try to keep it turned outward when not in use (most of the time we will not use it). Also, hot water comes from the boiler at fairly high pressure, so every time you open it, steam bursts out and splashes everywhere (this happens on every HX – Heat Exchanger machine)
- No information display: No pre-infusion time, no shot timer, no temperature setting, no information at all showing exactly what is happening. Your only option is to trust the Lelit Mara X.
- It has an OPV, but you have to open the machine to adjust it: The factory pump pressure is limited to 10 bar. Those who prefer 9 bar need this extra step, and not everyone is brave enough to tinker like that.

TIPS FOR USING THE LELIT MARA X ESPRESSO MACHINE
- There is a plastic “Caution: Hot” sticker on the group: The first thing many people do is tear it off. To make it easy, heat the machine for about 30 minutes first. The sticker then comes off easily and cleans up better. Tear it off while the machine is cold and cleaning that spot becomes a nightmare.
- Fitting the water softening filter (included) helps limit scale. If you use hard (unfiltered) water, replace it after 3 months. If you already control your input water with an RO filter (TDS about 50ppm), it lasts longer or is not needed at all.
- When the tank is nearly empty and the water light on the front flashes, refill it straight away.
- In Steam mode, try to brew as soon as the machine reaches temperature (all lights on). If you wait another 10-15 minutes without flushing before brewing, the temperature can exceed 100°C and scorch the coffee. Better still, keep the machine in Coffee Mode
- If possible, let the machine rest 1-2 minutes between extractions. This keeps the temperature stable and every cup consistent.
- The machine’s Eco mode kicks in after 30 minutes of no use. So if you switch it on, walk away and come back 50 minutes later, expect to switch it on again and wait 10 minutes for it to heat up. You can turn this mode off and use a smart plug (Xiaomi, Rang Dong…) to schedule it on and off to suit your own routine
- With Eco mode off, the lowest brewing temperature setting and Coffee Mode: After 24 minutes the water is about 90°C. Between 40 and 80 minutes the brewing temperature is almost stable at about 92°C. But after about 90 minutes the actual water temperature can climb to 95-96°C and will not come back down. The Mara X improves the HX boiler very well, but only for a 90-minute match.
- If the puck is soggy after brewing, you are using a little too little coffee. Raising the dose to suit the basket and adding a puck screen keeps the puck dry and the E61 group cleaner.
HOW TO TURN ECO MODE ON/ OFF
By default the machine goes to sleep after 30 minutes, pausing heating and keeping itself warm. It takes about 10 minutes to fully heat up again from this mode.
Depending on your habits, eco mode can be turned on or off with these steps:
- Step 1: Switch the machine off
- Step 2: Raise the E61 lever to the top position
- Step 3: Switch the machine on and wait for the lights to flash
- Step 4: Lower the E61 lever all the way
- Step 5: Switch the machine off
WHO IS THE LELIT MARA X ESPRESSO MACHINE FOR?
The Mara X is only for home users who love a simple, compact E61 machine without lots of complicated settings.
It is stable, but only for a certain time (90 minutes), not the kind of machine that runs from 7am to 9pm. So the MaraX is not suitable for a café.
It also suits people who like medium to dark roasts best. Raise the E61 lever and the machine pulls a perfect cup on its own!
For light roasts, the Lelit Mara X does not really do the job well. You can add a flow control paddle or move to the Bianca if you drink these beans.
LELIT MARAX ESPRESSO MACHINE SPECIFICATIONS
- Brand: Lelit
- Mã máy: PL62X
- Dimensions (W x D x H): 22 x 41 x 35cm
- Machine weight: 18kg
- Material: Stainless steel
- Steel boiler capacity: 1800ml/ 1400W
- Olab Silent Green vibration pump
- Default pump pressure: 10bar, adjustable via the OPV inside the machine
- Pump and boiler pressure gauges built into the body.
- Water tank: 2500ml (2.5 litres)
- Voltage: 220V
- Made in Italia
- 12-month warranty
THE LELIT MARAX SET INCLUDES
- 1 Máy pha
- 1 double portafilter
- 3 IMS baskets: 9-11g / 14-18g / 18-21g
- 1 metal blind basket
- 1 x metal tamper
- 1 x plastic coffee scoop
- 1 water softening filter
- 1 cleaning brush
- 1 metal cup stand
- User manual (view the pdf file here)
MARA X ACCESSORIES IN STEEL
Tiếng Việt










Reviews
There are no reviews yet.