Among countless espresso machines on the market, the Profitec Pro 500 still finds its own path as the choice for people who love making Latte at home!
STANDOUT FEATURES OF THE PROFITEC PRO 500 ESPRESSO MACHINE
1. THE PROFITEC PRO 500 HAS UNLIMITED MILK STEAMING POWER
That is an exaggeration, of course. No water, no steam!
In reality, one milk steaming session lasts about 20-30 seconds, and you steam milk at most twice in a row. Still, the Pro 500 can keep steaming until the boiler runs dry (no ordinary user will ever reach this limit). In a test with the steam wand open for 5 minutes, the steam pressure did not drop but actually rose over time (it dropped at first, then climbed again).
Strange! The Profitec Pro 500 has 1400W of heating power, the same as most Italian machines, so how is its milk steaming pressure superior?
Look closely and the Pro 500 has 2 differences that let Profitec achieve this:
- The boiler is programmed to heat at full power throughout milk steaming, producing steam as fast as it is used.
- Cold water also stops being fed into the boiler, so the space for steam keeps growing over time. As a result, the pressure gets stronger instead of weaker as usual.
2. A SPRING-ASSISTED ROTARY STEAM VALVE FOR CONTROL
One trait of ordinary steam valves is that they give you little sense of control. Sometimes you have to turn 2 full turns before steam comes out, and the flow is fairly hard to adjust. Machines from Italia often have this issue.
The Pro 500 uses a spring assist, so just a light 1/4 turn starts the steam. With every small nudge, the steam power changes immediately and very clearly.
This is also the main reason lovers of milk drinks like Latte or Cappuccino specifically choose the Profitec Pro 500. Whether your skills are basic or advanced, the Pro 500 handles them very well.
3. THE PROFITEC PRO 500 USES A STEEL HEAT EXCHANGER BOILER
The biggest advantage of a heat exchanger boiler is that the brewing water is always 100% fresh, running from the external tank through the heating system. So you never have to worry about boiler water being reheated over and over and affecting the flavour. An HX machine also costs much less than a dual boiler machine.
The drawback of an HX boiler is that it controls the brewing water temperature through the boiler temperature. The difference is usually about 30-35°C depending on the actual environment, and you have to test to find the best setting.
For example: For brewing water at 93°C, the boiler PID must be set to 124-125°C.
The steel boiler withstands high pressure and also limits scaling compared with a copper boiler. The boiler is mounted horizontally, which gives the machine a more “powerful” feel, since most commercial machines have their boilers in this position.
CORE FEATURES OF THE PROFITEC PRO 500 ESPRESSO MACHINE
1. THE PROFITEC PRO 500 IS MADE IN GERMANY
Germany is the “home” of Europe’s best-performing machinery and industrial mechanical equipment makers. Profitec inherits that engineering base. So the finish of the Pro 500 has few rivals at its price and outclasses almost every espresso machine from Italia, Korea or China.
The Pro 500 is not designed to innovate. It focuses entirely on doing the basics well. Its mechanical parts are solidly and durably machined for a long service life. It is a great fit for buyers who want something “built to last”.
2. THE PROFITEC PRO 500 USES AN E61 GROUPHEAD
The E61 is a professional espresso grouphead. Cast entirely from solid brass and weighing about 4kg, it keeps temperature more stable than small machines. Its design also lets the coffee be pre-infused automatically or by hand while keeping water pressure in the group.
The trade-off is one drawback you should know before buying: the machine takes quite long to heat up, usually about 25 minutes. If you just want to switch it on and brew straight away…the Pro 500 is not for you. Craving a coffee or needing one right now and switching on the Pro 500 will feel…helpless.
But if you plan your coffee, you can use a timer plug. Switch the machine on at 6:30 and by 7 you can calmly make a few cups for the whole family.
2. THE PROFITEC PRO 500 HAS PID TEMPERATURE CONTROL
PID (Proportional Integral Derivative) is a digital temperature control system.
The machine has sensors that detect changes in boiler pressure and temperature. When these values are too high or too low, the PID system tells the heating element to raise or lower them to the standard you have set.
The biggest benefit of PID is that you can set the temperature to your taste and explore different flavours from the same coffee. For example, raising the temperature may reduce sourness and lowering it may limit bitterness…
3. THE PROFITEC PRO 500 HAS AN OPV TO LIMIT BREWING PRESSURE
You can adjust the maximum pump pressure with a screw fitted right after the pump. The best maximum pump pressure is 10 bar, equal to about 9 bar at the group.
Note: fit the blind basket and keep the lever open while adjusting the valve.
4. THE PROFITEC PRO 500 CAN BE PLUMBED IN OR USE THE WATER TANK
The machine’s water tank holds up to 2.8L, so you can use it freely without constant refilling. If the water runs low, the machine has an automatic safety cut-off.
You can switch to a plumbed-in supply if the machine sits near a water source and you do not want to fill it by hand. Remember to turn the supply valve under the base to match the water source.
DRAWBACKS OF THE PROFITEC PRO 500 ESPRESSO MACHINE
- The digital display is hidden too well: To change any setting you have to pull out the drip tray, which is fairly inconvenient. Not to mention that having a display but not using it to show the shot time is a real waste.
- The metal drip tray sits a little loosely: To make it easy to pull out for cleaning, there are no rubber stops at the joins. So when you wipe the machine, you will feel it shift and rattle. Espresso extraction also causes a slight vibration that makes a digital scale’s readings jump. Some premium scales with auto features may misread the start of the espresso shot, such as the Timemore mini or Acaia Lunar (the timer starts before any espresso drops into the cup)
- You have to remove the casing to reach the OPV: So this job is only for those who love science and tinkering. If the OPV were moved to the drip tray area as on Profitec’s higher models, it would be much more convenient.
TIPS FOR USING THE PROFITEC PRO 500 ESPRESSO MACHINE
- The Profitec Pro 500 has a magnetic sensor in the water tank, so it cuts off automatically when the water runs out. When the orange light on the front of the machine is off, you need to add water.
- The machine has an Eco mode: It switches off automatically after about 30-600 minutes to suit your habits.
PROFITEC PRO 500 ESPRESSO MACHINE SPECIFICATIONS
- Brand: Profitec
- Mã máy: Pro 500
- Dimensions: W 302 x D 447 x H 393 cm
- Machine weight: 24kg
- Material: Stainless steel
- Boiler capacity: 2000ml/ 1400W
- Ulka EX5 vibration pump: Brass body, rated for about 30,000 extractions.
- Default pump pressure: 9bars – maximum 15 bars
- Built-in pump gauge and boiler pressure gauge
- Built-in timer that starts as soon as you press brew
- Built-in digital display for setting brewing profiles
- Water tank: 2800ml (2.8 litres), with a built-in plumbed-in connection
- Voltage: 220V
- Made in Germany
- 12-month warranty
THE PROFITEC PRO 500 SET INCLUDES
- 1 Máy pha
- 2 portafilters (single spout and double spout)
- 2 baskets
- 1 phin mù
- 1 metal tamper
- 1 coffee scoop
- 1 cleaning brush
- 1 drain hose
- 1 user manual (DOWNLOAD THE PDF VERSION HERE)
Tiếng Việt

















Reviews
There are no reviews yet.