The Puristika was first presented at the Host Milano 2019 exhibition and immediately became a sought-after machine for people who love pulling their own espresso every day.
As a Prosumer machine (where users give feedback and take part in refining the product), ECM designed the Puristika entirely around the real needs of home espresso experts. The goal was a purely mechanical E61 machine that is compact enough to fit any home.
You could say the Puristika takes espresso to the extreme: no milk steam wand, no hot water tap and no decorative extras. That is what gives its name meaning: “Puristika = pure“, espresso and nothing else.
It also puts special focus on flexible placement by separating the 2L water tank from the body. You can put the tank to the left, the right or behind the machine. It connects to the machine through 2 steel-braided hoses via a coupling at the back.
STANDOUT FEATURES OF THE ECM PURISTIKA ESPRESSO MACHINE
1. A THROTTLE KNOB ON THE FRONT TO CONTROL BREWING PRESSURE

This is the Puristika’s most distinctive feature. The knob lets you set the brewing pressure between 8 and 12 bar.
Depending on personal taste or the character of each coffee, the pressure can be changed to get the flavour you want. Higher pressure means more extraction, and the reverse.
Note that the Puristika’s knob does not work like the mechanical paddles on the Lelit Bianca. It is not for pressure profiling, only for setting the maximum pressure before brewing. Avoid turning the knob, or do it as little as possible, during extraction. Frequent turning can wear out the seal and the throttle valve faster.

Setting the brewing pressure is simple: Fit the included blind basket into the portafilter and lock it into the group. Raise the lever to run the pump, then turn the knob to the pressure limit you want. Turn clockwise to raise the limit and anticlockwise to lower it.
2. A DETACHABLE WATER TANK

The goal was to be as compact and flexible as possible, so ECM gave the Puristika a separate water tank. However tight your space is, there is always a spot for this machine.

The glass tank also makes it easy to see how much water is left so you can refill in time and never run out halfway through a shot.
A small note: The glass tank can break if hit hard, and a replacement is far from cheap.
3. A DESIGN THAT PUTS THE USER EXPERIENCE FIRST
3.1. MAGNETIC DRIP TRAY
One sign of thoughtful design and attention to user experience is the ECM Puristika’s drip tray. It slides out without having to be lifted. It also has magnets that hold it in place automatically, so it does not shift or rattle during extraction.
The magnetic pull is just strong enough to hold the tray in place, yet light enough to slide it out without spilling the water inside.

Under the drip tray is a spot to store the blind basket, so it is handy when cleaning the machine and never gets lost.
3.2. A BEAUTIFULLY FINISHED PORTAFILTER THAT MAKES THE MOST OF THE BREWING SPACE
The steel portafilter is extremely solid at about 700g. Its angular design has a spout flattened parallel to the counter, making it steadier while tamping. The spout also sits in the centre instead of pointing forward like many common portafilters.

The Puristika has a small drip tray, so this special design lets you fit a digital scale entirely on the tray.
Note that a small scale such as the Timemore Mini or Mischief Lunar, about 10x10cm, suits the Puristika

4. UPGRADE POTENTIAL OF THE ECM PURISTIKA
E61 machines always leave room for upgrades. If you want deeper control over espresso brewing, you can add a real-time Flowcontrol paddle and a pressure gauge right on the group.
These accessories can turn the Puristika into a perfect pure espresso machine for home, handling every coffee from light to dark roasts by changing the pressure profile during brewing (pre-infusion, lowering or raising pressure at each stage…)

CORE FEATURES OF THE ECM PURISTIKA ESPRESSO MACHINE
1. THE ECM PURISTIKA USES AN E61 GROUPHEAD
The E61 group is made of chrome-plated brass. It is heavy and holds heat extremely well thanks to its hot water circulation, keeping the temperature stable throughout extraction. In return, it takes longer to be ready than machines with other group types, usually 10-15 minutes before you can start brewing.
ECM has improved many small details in the group so the E61 unit runs more reliably! You could call it the ECM grouphead!

E61 also means the Puristika is semi-automatic: You switch the lever on and off yourself once the coffee has extracted the way you want. The machine has no push-button auto mode and does not stop by time on its own.
2. A SIMPLE, SOLID BUILD
The Puristika is not too heavy, only about 14kg in total, yet knocking on the top sounds like one single block. The whole outer shell is polished stainless steel. The sides and top are coated in a special textured, scratch-resistant graphite material that looks great.
Inside is an insulated steel boiler, and the pipes connected directly to the boiler are all copper for long service life. Components are laid out neatly and logically, making servicing and repair easy.

3. THE PURISTIKA IS A SINGLE BOILER MACHINE WITH PID TEMPERATURE CONTROL
The 750ml steel boiler has a built-in PID (Proportional-Integral-Derivative) to control the brewing temperature. In real-world use, with no milk steam wand, a single boiler is all the Puristika needs!
PID is now a must-have feature on every premium espresso machine. You can set a different brewing temperature for each coffee. The ECM Puristika adjusts in steps of ± 1°C.
4. THE ECM PURISTIKA USES A VIBRATION PUMP
A vibration pump is of course louder than a rotary pump, but the Puristika’s pump noise is greatly reduced by its rubber shock-absorbing suspension.
One consolation is that if the vibration pump fails, replacing it is very easy and reasonably priced.
5. THE PURISTIKA USES A STANDARD 58MM BASKET
The 58mm basket is the current standard for professional espresso machines. You can easily buy espresso accessories such as an OCD, tamper, puck screen, filter papers, dosing ring…
WHO SHOULD USE THE ECM PURISTIKA ESPRESSO MACHINE?
No machine is perfect for everyone. If any of the points below describe you, you should NOT use the Puristika
- You love milk-based drinks like Latte: The Puristika has no steam wand to froth milk at all.
- You do not like purely mechanical machines: Operating the Puristika’s lever, while controlling time and dose yourself, only suits people who like to be hands-on. You would do better with a machine that has timed auto modes (Lelit Victoria, Lelit Elizabeth…)
- Your budget is tight: The Puristika usually comes with at least a grinder like the DF64. Add E61 accessories and you need about 40 million VND
The Puristika suits you if you match one of the following:
- You only drink espresso or americano
- You really love German-origin machines, especially mechanically designed E61 machines
- You like small, refined things in a “less is more” spirit: simple, yet giving the most enjoyment.
REAL-WORLD WARM-UP TIME OF THE ECM PURISTIKA E61 MACHINE
ECM states that the Puristika needs only 10 minutes to be ready. Is that accurate?
The answer is: “Yes and no“.
In practice, going by the display, the Puristika does show it is ready to brew after only 10 minutes. But you need to tell “ready” apart from “fully stable”
- Ready: After 10 minutes the boiler reaches the set temperature, the whole E61 group is fairly hot and you can brew right away. If the portafilter is locked in, it is warm too (but not at the same temperature as the group)
- Fully stable: The hot water circulating between the boiler and the group reaches about the same temperature. The portafilter in the group and the whole machine are hot as well. Brewing now, the machine loses less heat and can work continuously without running short of temperature. The Puristika needs about 20 minutes to reach this state
So what you do depends on your actual brewing situation. If you want to brew after 10 minutes, flush hot water through the group and portafilter so this area quickly reaches the best temperature. If you are not in a hurry, just wait 20 minutes after switching on, when the machine is at its best.
***This test only holds for the weather and voltage where the machine was tested. Winter, summer and voltage stability will change the warm-up time…But the difference is only about 1 minute!
TIPS FOR USING THE ECM PURISTIKA ESPRESSO MACHINE
- The machine is designed to be seen from the front. From behind, the power switch and the 2 hoses at the back are exposed, which is not very attractive.
- The display can be turned off by pressing the “+” button: A small dot appears in the corner. Repeat to turn the display back on.
- You can set ECO mode (switch off after a preset time) and cleaning reminders through the central display
- The throttle knob is steel, so it heats up with the machine, and that is perfectly normal. ECM notes this in the user manual.
- Switch the machine on at least 20 minutes before use, or use a timer plug so it switches on before you need it.
ECM PURISTIKA ESPRESSO MACHINE SPECIFICATIONS
- Brand: ECM
- Mã máy: Puristika
- Dimensions: W 19.5 x D 34.8 x H 31.5 cm
- Machine weight: 13.4kg
- Material: Stainless steel
- Brewing boiler capacity: 750ml/ 1200W
- Improved low-noise vibration pump
- Adjustable pump pressure: 8 -12 bars
- Built-in brewing pressure gauge and pressure adjustment knob
- Built-in digital display for setting brew profiles (temperature, time)
- Detachable glass water tank: 2000ml (2 litres)
- Voltage: 220V
- Made in Italy (Italia)
- 12-month warranty
THE ECM PURISTIKA SET INCLUDES
- 1 máy pha
- 1 x 58mm double-spout portafilter
- 1 single basket + 1 double basket
- 1 metal blind basket
- 1 metal tamper
- 1 cleaning brush
- 1 user manual (DOWNLOAD THE PDF VERSION HERE)
Tiếng Việt



























Reviews
There are no reviews yet.