Home espresso machines are usually compact and fairly simple. They typically use a single boiler or a Thermoblock for direct heating. Low power, unstable temperature, and no steaming while brewing… are the weak points of this type of machine.
Commercial machines, on the other hand, use large boilers and professional groupheads such as the E61, or higher up, saturated and semi-saturated groups. Their advantage is power and stability, with independent brewing and steaming.
The Gemilai 3035 is a commercial machine scaled down for individual customers who want a commercial experience. It has all the technology of the big machines… at an accessible price.
GEMILAI 3035 LÀ MÁY PHA ESPRESSO GROUP E61

- Pros: Solidly machined, holds heat well, relatively easy to repair, manually controlled. It allows pre-infusion, which reduces channeling during extraction.
- Cons: Slower to heat up than small machines (but still faster than commercial machines)
THE GEMILAI 3035 IS A HEAT EXCHANGER ESPRESSO MACHINE
A heat exchanger espresso machine has a single boiler for steam and hot water. Inside the boiler, a copper heat exchange tube runs through to supply the brewing water for espresso.
When extraction starts, the pump draws cold water from the source through the heat exchanger and into the grouphead.

- The advantage of this design is that the brewing water is separate from the boiler, so you can steam milk while pulling a shot.
- The drawback of this design is that the temperature of the water through the heat exchanger is hard to control. The longer the water stays in the coil, the hotter it gets. You can flush a small stream of water before extracting to avoid overheating.
THE GEMILAI 3035 USES AN ITALIAN VIBRATION PUMP
A vibration pump is compact and durable. It is a little noisier than a rotary pump, but still far quieter than a coffee grinder
On the 3035, Gemilai mounts the vibration pump “suspended” on rubber pads, so the noise is much lower than with the usual method of screwing it directly to the frame.
A vibration pump is also easy to replace if something goes wrong. The replacement cost is very low!
OTHER FEATURES OF THE GEMILAI 3035 ESPRESSO MACHINE
- Large boiler of up to 2L: Fast, strong steam pressure, and with a 3-hole steam tip it can froth milk in about 20 seconds.
- Hot water tap: For a hot Americano, tea, or warming cups…
- PID temperature control (Proportional Integral Derivative): Lets the machine keep adjusting the boiler to the set temperature in real time
- Professional 58mm portafilter: Easy to find espresso accessories such as an OCD, a tamper, a dosing cup, a dosing ring…
- Walnut portafilter handle, knobs and levers: They give the machine a softer feel that suits spaces where looks matter.
- Body entirely in stainless steel: Keeps the machine shiny no matter how much time passes
TIPS FOR USING THE GEMILAI 3035 ESPRESSO MACHINE
- A trait of heat exchanger machines is that the longer the machine stays on, the hotter the coil running through the boiler gets. Before pulling a shot, flush about 50ml of water to rebalance it.
- Set the boiler temperature to about 125-130℃ (the espresso brewing water will be 30-35 degrees lower). You can change it depending on your brew profile (fine/ coarse grind, dark/ light roast, fast/ slow extraction…)
- You can use a smart timer plug (Xiaomi, Rang Dong…) with the machine switch left on. Let the machine start 20 minutes ahead (with the portafilter locked in) and it will be in perfect condition when you brew.
DRAWBACKS OF THE GEMILAI CRM3035 ESPRESSO MACHINE
- The machine can be plumbed in for water supply, but has no direct drain option: When the drip tray is full you have to empty it by hand. It suits home use better than a café.
- No OPV: This is hard to understand! It is a simple but very effective valve that prevents extraction at excessive pressure. If you want to upgrade, you can order an OPV separately for about 200k VND and fit it directly to the vibration pump head.
- The drip tray cover is a CNC-drilled steel plate, but the holes are still a bit far apart. When you flush water, quite a lot pools on the hot surface.
- The drip tray just sits on top without any rubber stoppers to hold it, so it rattles rather annoyingly when you wipe it.
- The power switch sits too low, so it often gets splashed while brewing and is a bit hard to clean. A switch in a more open position would be easier to use, stay cleaner and make cleaning the brewing area simpler.
SETTING UP THE GEMILAI 3035 ESPRESSO MACHINE
Press the setting button on the display in this order:
- 1st press | Pre infusion: P00-P30, a soak time of 0 to 30 seconds
- 2nd press | Boiler temperature: From 80 to 135°C
- 3rd press | Sleep mode: EC1 (30 minutes); EC2 (60 minutes); EC3 (90 minutes); EC4 (180 minutes); EC5 (sleep mode off)
- 4th press | Water supply setting: F0 for the water tank and F1 for a plumbed-in supply (related to line pressure)
COMMON ERROR MESSAGES ON THE GEMILAI 3035 DISPLAY
- F3: The water tank is empty and needs refilling
- E2: The pump has run for over 2 minutes (usually because the coffee is ground too fine and you still try to extract)
- E3: The hot water tap has run continuously for 5 minutes (usually only on plumbed-in machines)
GEMILAI 3035 ESPRESSO MACHINE SPECIFICATIONS
- Brand: Gemilai
- Mã máy: G3035
- Dimensions (W x D x H): 286 x 443 x 395mm
- Machine weight: 25kg
- Material: Stainless steel
- Voltage/ Power: 220V/ 2100W
- Italian Ulka vibration pump
- Maximum pump pressure: 15 bars
- Built-in real-time brewing pressure gauge
- Built-in timer that starts as soon as you press brew
- Built-in digital display for setting brew profiles (temperature, time)
- Water tank: 1700ml (1.7 litres)
- Made in China
- 12-month warranty
THE GEMILAI 3035 SET INCLUDES
- 1 Máy pha
- 1 x 58mm double-spout portafilter
- 1 x 8g basket + 1 x 18g basket
- 1 x metal tamper
- 1 x plastic coffee scoop
- 1 x rubber blind basket for cleaning the machine
- 1 x user manual
Tiếng Việt



















Reviews
There are no reviews yet.